ARH Studios ont annoncés leurs nouveautés!!
"Its with great pleasure to announce two of our new licenses.
The licenses are Tarzan (and Jane) and Frank Frazetta in full majestic 1/4!
We have already Troy working on a Tarzan fighting a gigantic crocodile diorama. Ehren Biennert sculpting Frazetta's Indomitable. Both will be ready in time for San Diego Con.
Also we will have Troy sculpting Frazetta's Atlantis and Ehren sculpting Frazetta's Queen of Egypt in time for New York Con in October.
Here are at least 4 of the sculpts from Frazetta that will be made by ARH Studios Inc. - unlike the last few sculpts from us, these will be true to the art and very accurate to the artwork."
Indomitable is now WIP all in 1/4!
Death Dealer in 1/4!
Atlantis in 1/4!
Queen of Egypt in 1/4!
ARH Studios : 1/4 Frank Frazetta + 1/4 Tarzan
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Pizza a écrit :Et merde je suis dans la merde, merde !
Pour moi le dio 'Indomitable' pourrait etre très tentant!
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
MUSEUM QUALITY!!!!
"The idea behind those two new licenses, especially Frazetta is to produce museum quality works. All the pieces will be in 1/4th scale, and during all my negotiations with Frazetta’s family, there was one point that was very clear since the beginning for all of us.
We want to represent Frazetta’s work in the most meaningful and faithful way possible. It means we will not be taking any “creative license” with the paintings, and we will not be “interpreting” it either. Our sculptures will be exactly like a 3D image of the paintings, so if for instance Frazetta didn’t paint the tiger’s legs with much definition, we won’t do it for him! It will be a rough sculpture in the areas that Frazetta left it rough.
Also, we will be producing relief sculptures of Frazetta’s paintings, so we will have not only the statue but a “wall sculpture” like a painting but with relief that you can hang on the wall. All the relief sculptures will have the same measurements of the original paintings, so it will be very close to have the real painting on your wall!
Arahom Radjah
ARH Studios Inc."
"The idea behind those two new licenses, especially Frazetta is to produce museum quality works. All the pieces will be in 1/4th scale, and during all my negotiations with Frazetta’s family, there was one point that was very clear since the beginning for all of us.
We want to represent Frazetta’s work in the most meaningful and faithful way possible. It means we will not be taking any “creative license” with the paintings, and we will not be “interpreting” it either. Our sculptures will be exactly like a 3D image of the paintings, so if for instance Frazetta didn’t paint the tiger’s legs with much definition, we won’t do it for him! It will be a rough sculpture in the areas that Frazetta left it rough.
Also, we will be producing relief sculptures of Frazetta’s paintings, so we will have not only the statue but a “wall sculpture” like a painting but with relief that you can hang on the wall. All the relief sculptures will have the same measurements of the original paintings, so it will be very close to have the real painting on your wall!
Arahom Radjah
ARH Studios Inc."
- Sarlacc
- Admin Exhibitionniste | Co-Fondateur
- Messages : 29095
- Enregistré le : 08 février 2010, 00:01
- Contact :
C'est juste bestial! Bon, que je vois le visage absolument horrible du Con vs Snake, j'ai peur, mais là l'idée de suivre scrupuleusement l'oeuvre de Frazetta me plaît!
Bref, vivement le Death Dealer!
Bref, vivement le Death Dealer!
- WingdSoldier
- Dérangé
- Messages : 338
- Enregistré le : 12 mai 2013, 20:39
Alors, j'ai des nouveaux espoirs pour une pièce de Fire And Ice
- zoom le lapinou
- Photographe obsédé
- Messages : 7836
- Enregistré le : 23 juin 2010, 13:36
Superbes, mais ARH c'est juste énorme à caser, et niveau tarif ça fait super bobo
Piètre Dieu...
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Effectivement,les différents sculptes du visage de Conan dans cette pièce ARH sont absolument horrible...et dire que c'est le même artiste qui a sculpté the fury of the beast qui est magnifique!Sarlacc a écrit :C'est juste bestial! Bon, que je vois le visage absolument horrible du Con vs Snake, j'ai peur, mais là l'idée de suivre scrupuleusement l'oeuvre de Frazetta me plaît!
Bref, vivement le Death Dealer!
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
D'accord...ils vont devoir améliorer les détails sur leurs sculptes pour atteindre le 'museum quality' sur ces pièces Frazetta.Kenobiv a écrit :Et les pièces sont pas toujours folichonnes! A voir!
- Sarlacc
- Admin Exhibitionniste | Co-Fondateur
- Messages : 29095
- Enregistré le : 08 février 2010, 00:01
- Contact :
nucleoblast a écrit :Effectivement,les différents sculptes du visage de Conan dans cette pièce ARH sont absolument horrible...et dire que c'est le même artiste qui a sculpté the fury of the beast qui est magnifique!Sarlacc a écrit :C'est juste bestial! Bon, que je vois le visage absolument horrible du Con vs Snake, j'ai peur, mais là l'idée de suivre scrupuleusement l'oeuvre de Frazetta me plaît!
Bref, vivement le Death Dealer!
Ah sérieux! Putain ouais là tu m'en bouches un coin! Je savais pas!
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Oui,c'est Troy McDevitt l'artiste sur ces deux pièces de Conan.Cest un jeune sculpteur très prométteur,je crois qu'il a 25 ans si je ne me trompe....
C'est aussi lui qui est occupé à sculpter le dio de Tarzan avec le crocodile.
C'est aussi lui qui est occupé à sculpter le dio de Tarzan avec le crocodile.
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Bonne nouvelle: ARH Studios ont décidés de sculpter leur grands diorama's en 1/5...la même échelle que le Fury de Side
Arahom Radjah:
"I have been weighing all the inputs about the upcoming Frazetta line, and you guys can be sure I hear you all, and all the feedback posted here has value to us.
The Indomitable at 1/4th would measure 36 high, 35 wide and about 22 in depth. It would take like half of a dinner table to display it, and it would weigh a ton!!! (Not literally!)
Also the price tag would be from $2,500 up, so these two factors combined would for sure limit the number of you guys who can display it.
I decide then to reduce the scale on the Indomitable to 1/5th. This way, the size will diminish, and we will probably be able to keep it under the $2,000 range.
I will not change any of the other sizes because all the others we selected for the first phase are very manageable at 1/4th scale. Probably other statues as complex as the Indomitable like the Destroyer, the Seven Romans and etc, we will also do in 1/5th, but the ones with a couple figures only, we will keep at 1/4th."
Arahom Radjah:
"I have been weighing all the inputs about the upcoming Frazetta line, and you guys can be sure I hear you all, and all the feedback posted here has value to us.
The Indomitable at 1/4th would measure 36 high, 35 wide and about 22 in depth. It would take like half of a dinner table to display it, and it would weigh a ton!!! (Not literally!)
Also the price tag would be from $2,500 up, so these two factors combined would for sure limit the number of you guys who can display it.
I decide then to reduce the scale on the Indomitable to 1/5th. This way, the size will diminish, and we will probably be able to keep it under the $2,000 range.
I will not change any of the other sizes because all the others we selected for the first phase are very manageable at 1/4th scale. Probably other statues as complex as the Indomitable like the Destroyer, the Seven Romans and etc, we will also do in 1/5th, but the ones with a couple figures only, we will keep at 1/4th."
- zoom le lapinou
- Photographe obsédé
- Messages : 7836
- Enregistré le : 23 juin 2010, 13:36
Mine de rien, l'illustration du death dealer est parue l'année de ma naissance, ça date un max lol
Piètre Dieu...
-
- Zibo miniature
- Messages : 2214
- Enregistré le : 11 février 2010, 12:50
Je connais pas vraiment l'oeuvre de Frazetta mais je pourrais me laisser tenter par le Death Dealer!
J'ai la Medusa de chez eux, ils font du bon comme du moins bon et c'est pas toujours très pro je trouve...
A voir!
J'ai la Medusa de chez eux, ils font du bon comme du moins bon et c'est pas toujours très pro je trouve...
A voir!
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Latest update:
"We are pleased to announce the very latest talent to join ARH Studios: The Shiflett Brothers! They will be sculpting Frazetta “Monster out of Time” for us and following with one of our ARH Originals from our line of History/Mythology!"
Arahom Radjah
ARH Studios Inc.
"We are pleased to announce the very latest talent to join ARH Studios: The Shiflett Brothers! They will be sculpting Frazetta “Monster out of Time” for us and following with one of our ARH Originals from our line of History/Mythology!"
Arahom Radjah
ARH Studios Inc.
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Pour les amateurs...
"Full Bronze 1:4 Statues and 1:5 scale also now secured by ARH Studios Inc. for exclusive rights For Frazetta statue license."
Difficile d'anticiper le prix pour ces 1/4 bronzes mais si on prend l'example des bronzes SW de Sideshow on peut s'attendre à des prix dans les 5000-6000 dollars...
"Full Bronze 1:4 Statues and 1:5 scale also now secured by ARH Studios Inc. for exclusive rights For Frazetta statue license."
Difficile d'anticiper le prix pour ces 1/4 bronzes mais si on prend l'example des bronzes SW de Sideshow on peut s'attendre à des prix dans les 5000-6000 dollars...
- Sarlacc
- Admin Exhibitionniste | Co-Fondateur
- Messages : 29095
- Enregistré le : 08 février 2010, 00:01
- Contact :
Oui donc voilà quoi!
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Un bas relief de ces bâtiments pour accrocher au mur derrière la statue serait formidable!
Modifié en dernier par nucleoblast le 26 avril 2014, 14:36, modifié 1 fois.
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Ils nous sortent un petit "fury of the beast" avec Tarzan!
Si c'est du 1/4 on aurra un dio d'un mètre d'hauteur!
Si c'est du 1/4 on aurra un dio d'un mètre d'hauteur!
- WingdSoldier
- Dérangé
- Messages : 338
- Enregistré le : 12 mai 2013, 20:39
Il semble que ARH est en voie du gros coup.
- Sarlacc
- Admin Exhibitionniste | Co-Fondateur
- Messages : 29095
- Enregistré le : 08 février 2010, 00:01
- Contact :
Ca semble démentiel!
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Alex (Averone) :"Here are a list of statue you should see in NYCC 2014"
@NYCC Booth #436
1. Frazetta Death Dealer
2. Frazetta Huntress
3. Frazetta Atlantis
4. Frazetta Barbarian
5. Arhian
6. Hercules
7. Alexander the Great
8. Tarzan Cry
9. Shiflett Bros. Viking
10. Queen of Vampires
11. Tarzan Blind Rage (Tarzan Vs. Croc)
@NYCC Booth #436
1. Frazetta Death Dealer
2. Frazetta Huntress
3. Frazetta Atlantis
4. Frazetta Barbarian
5. Arhian
6. Hercules
7. Alexander the Great
8. Tarzan Cry
9. Shiflett Bros. Viking
10. Queen of Vampires
11. Tarzan Blind Rage (Tarzan Vs. Croc)
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Pour ceux qui ne savent pas...le NYCC 2014 est de 9 --> 12 octobre.
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
- nucleoblast
- Schizophrène
- Messages : 1585
- Enregistré le : 07 septembre 2011, 16:18
Ah ok,merci Pizza...je n'avais pas vu.